Blog

How To Fix HP Printer Out of Paper Error

Fix HP Printer

HP printers provide users with top-notch printing products based on various usages. These printers are designed to provide excellent printing to their customers. However, an error may occur when using an HP printer.

No printer is error-free. This also applies to HP printers. HP Printer Error 0XC18A0206 stands out from most of the primary mistakes you make when using HP Photosmart printers. In each case, there are different approaches to resolving HP printer error 0XC18A0206. You can find all the subtleties in the most professional way to resolve HP printer error 0XC18A0206 in this article.

HP printer error 0XC18A0206 indicates that there is a problem with the ink cartridge. This HP0XC18A0206 printer error message is also known as an ink system failure. HP Printer Error 0XC18A0206 occurs on HP Photosmart printers. This HP Printer Error 0xc18a0206 issue can be solved in the following ways without anyone else.

One of the errors described in this blog is HP Printer Error 0xc18a0206. Read this article to find all the steps to fix the error. You can also contact HP Printer Support to resolve the issue immediately.

What is HP Printer Out of Paper Error

An ink system failure error is displayed on the printer control panel.

General HP Printer Issues:

  • Paper Jam-This is a situation where the media is jammed in the printer.
  • Ghost Image: This is a situation where the image is printed with poor quality.
  • Error 0xc18a0206: HP printer error 0xc18a0206 appears in the printer control.
  • The reasons for the HP error 0xc18a0206 are as follows:
  • The printer settings may not be installed correctly
  • The cartridge is damaged or improperly inserted
  • The printer cartridge is low

Solution for HP Printer Out of Paper Error

If the cartridge is low or empty-If, you see an ink warning message before this message. We recommend that you replace the cartridge.

Make sure the cartridge is inserted or installed correctly.

Try removing the cartridge and then reinserting it

Use the printer’s automatic cleaning utility.

Update the printer driver.

If HP printer error 0xc18a0206 is not resolved, contact the HP team.

0xc18a0206 Solution “Ink system failure” error

Remove all ink cartridges from the printer

  • Check if there is any tape left in the cartridge.
  • Remove the cartridge and all contacts in the HP PhotoSmart All-in-One Printer.
  • Could you turn off the printer and unplug it?
  • Reinsert the cartridge.

Strategy 1: Access the Support Menu

• To go to the Boost Menu, instead of pressing the * and # keys simultaneously, press the * and # keys at the same time and press 1, 2, and 3 latches at the same time.

• Next, touch “Data Menu” with the bolt key.

• Layout Menu is reflected on the screen. You need to touch on the OK alternative.

• Now, the “Computer Failure Status” will be displayed on the screen, and tap OK to delete it.

• Then press down on the drop catch and press the power catch to turn off the HP printer.

• Then disconnect the power link from the HP printer and electrical plug.

• Wait 2-3 minutes.

• After a few minutes, reconnect the power cord to the HP printer and the critical outlet.

• Complete the sample print job and check for HP printer error 0XC18A0206.

• If the problem persists, go to Technique 2.

Strategy 2: Reinsert the Ink Cartridge

• First, press the power button to turn on the printer and sit for a while until it is inactive and silent.

• Now disconnect all USB links from the printer without switching off the printer. Make sure the HP printer is associated with the remote system.

• Open the optimal inlet for the printer and carefully drain the ink cartridges.

• When the printer LCDs the message “Please insert the cartridge,” remove the feed link from the printer.

• Wait approximately 60 seconds, then reconnect the power link to the printer.

• Make sure the printer turns on naturally or press the power button.

• Then deliberately put the cartridge in place. Make sure the cartridge is effectively returned to its original position.

• Close the printer ink cartridge inlet and reattach all USB links to the HP printer.

If error 0xc18a0206 does not resolve to any solution, don’t hesitate to contact the helpline for optimal printer support. This service is the best support service for troubleshooting HP printers. This support is available 24 hours a day, seven days a week so that you can request support at any time.

Leave a Reply

Your email address will not be published. Required fields are marked *

two × three =